Research Facilities:
TG and DSC tests
Conditions: From room temperature to 800 and 1100 ° C under Air atmosphere or Argon gas
Lab description:
1- The amount of sample should not be less than 1 gram.
2- The sample should be powdered or its dimensions should not exceed 2 mm.
3. Do not experience an explosive or severe combustion reaction or sol-gel during heating in the sample.
4- The sample should not be a polymer, organic or liquid material.
5- Naming the samples by numbers (1, 2, 3, etc.)
6. The sample should not contain zinc (Zn), magnesium (Mg), cadmium (Cd), potassium (K), chlorine (Cl), sodium (Na) or graphene.
7- Test results are valid from 100 °C and above.
8- Isothermal analysis is performed at a temperature of less than 800 ° C for a maximum of one hour and at a temperature above 800 ° C, isothermal analysis is not performed.
In case the sample causes damage to the device during the test, the user is responsible for compensating all damages.
-------------------------------------------------- ------------------------------------------
* University students are required to register the application and complete the form in the process management system of Isfahan University of Technology at the following address:
- After confirming the request by referring to the head of the laboratory, the necessary arrangements will be made to perform the test.
-------------------------------------------------- ------------------------------------------
Tel: 03133912750 and 52
Email: m.nourbakhsh@of.iut.ac.ir
Address: Materials Engineering Department, Isfahan University of Technology, Isfahan, 84156-83111, Iran.
- ۰۳۱۳۳۹۱۵۷۱۹
- 03133912752