استاد

دکتر بهزاد نيرومند

رتبه علمی:

استاد

تلفن:

۰۳۱-۳۳۹۱۵۷۳۱

فکس:

۰۳۱-۳۳۹۱۲۷۵۲

ایمیل:

behzn@cc.iut.ac.ir

صفحه شخصی:

Go to Website

.

 

.

 

 

مقاله در مجلات بین المللی

  1. Niroumand, B.‎ & Xia, K.‎ "3D Study of the Structure of Primary Crystals in a Rheocast Al-Cu Alloy”, Journal of Materials Science and Engineering, A283 (2000)‎ 70-75.‎
  1. Ahmadi, J., Monirvaghefi, M.‎, Salehi, M.‎, Niroumand, B.‎ “Effect of Pearlite Interlamellar Spacing on Predominant Abrasive Wear Mechanism of Fully Pearlitic steel”, Transactions of Materials and Heat Treatment, 25, (2004)‎ 1207-1213.‎
  1. Falak, P.‎, Niroumand, B.‎ "Rheocasting of an Al-Si alloy", Scripta Materialia,Vol.‎53/1, (2005)‎ 53-57.‎
  1. Maleki, A.‎, Niroumand, B.‎ Shafeai, A.‎ "Effects of Squeeze Casting Parameters on Density, Macrostructure and Hardness of LM13 Alloy", Journal of Materials Science and Engineering A, 428, (2006)‎ 135-140.‎
  1. Mirzadeh, H.‎, Niroumand, B.‎, " Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds" Solid State Phenomena, 116-117 (2006)‎ 497-500.‎
  1. Reisi, M.‎, Niroumand, B.‎, "Evolution of Primary Particles Morphology during Secondary Cooling in SSR® Process" Solid State Phenomena, 116-117 (2006)‎ 493-496.‎
  1.  Tahamtan S.‎, Golozar M.A.‎, Karimzadeh F.‎ , Niroumand B.‎, "Microstructure and Tensile Properties of Thixoformed A356 Alloy", Journal of Materials Characterization, (2008)‎ 223-228.‎
  1. Ghahremainian, M.‎, Niroumand, B.‎, "Compocasting of an Al-Si-SiCp Composite Using Powder Injection Method" Solid State Phenomena, 141-143 (2008)‎ 175-180.
  1. Reisi, M.‎, Niroumand, B.‎, "Effects of Stirring Parameters on Rheocast Structure of Al-7.‎1wt%Si Alloy" Journal of Alloys and Compounds, 470 (2009)‎ 413-419.‎
  1. Mirzadeh, H.‎, Niroumand, B.‎, " Effects of Rheocasting Parameters on the Microstructure of Rheo-Centrifuged Cast Al-7.‎1wt%Si Alloy" Journal of Alloys and Compounds, 474 (2009)‎ 257-263.‎
  1. Ashiri, R.‎, Niroumand, B.‎, Karimzadeh, F.‎, Hamani, M.‎, Pouranvari, M.‎, "Effect of Casting Process on Microstructure and Tribological Behavior of LM13 Alloy" Journal of Alloys and Compounds, 475 (2009)‎ 321-327.
  1. Reisi, M.‎, Niroumand, B.‎, "Growth of Primary Particles during Secondary Cooling of a Rheocast Alloy" Journal of Alloys and Compounds, 475 (2009)‎ 643-647.‎
  1. Maleki, A.‎, Shafyei, A.‎, Niroumand, B.‎ "Effects of Squeeze Casting Parameters on the Microstructure of LM13 Alloy" Journal of Materials Processing Technology, 209 (2009)‎ 3790-3797.
  1. Maleki, A.‎, Meratian, M.‎, Niroumand, B.‎, Gupta, M.‎, "Synthesis of In-situ Aluminum Matrix Composite Using a New Activated Powder Injection Method" Metallurgical and Materials Transactions A, 39, (2008)‎ 3034-3039.‎
  1. Mirzadeh, H.‎, Niroumand, B.‎, "Fluidity of Al-Si Semisolid Slurries during Rheocasting by a Novel Process" Journal of Materials Processing Technology, 209, (2009)‎ 4977-4982.‎
  1. Nasr Esfahani, M.‎, Niroumand, B.‎, "Design of Hot Tearing Test Apparatus for Cast Alloys" Casting Technologies, ۵۵, (۲۰۰۹) ۴۲-۴۵.
  1. Niroumand, B.‎, Mirzadeh, H.‎, Reisi, M.‎, "Evaluation of Cast-On-Strap Joints in Lead-Acid Batteries" Journal of Materials Characterization, 60 (2009)‎ 1555-1560.‎
  1. Nasr Esfahani, M.‎, Niroumand, B.‎, "Design of A New Hot Tearing Test Apparatus and Modification of its Operation" Journal of Metals and Materials International, 16 (2010)‎ 35-38.‎
  1.  Nasr Esfahani, M.‎, Niroumand, B.‎, "Study of Hot Tearing of A206 Aluminum Alloy using Instrumented Constrained T-shaped Casting Method" Journal of Materials characterization, 61 (2010)‎ 318-324.‎
  1. Abasipour, B.‎, Niroumand, B.‎, Monir-Vaghefi, M.‎, "Compocasting of A356-CNT Composite", Transactions of Nonferrous Metals Society of China, 20, (2010)‎ 1561-1566.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, "Synthesis and Characterization of 356-SiCp Composites by Stir Casting and Compocasting Methods", Transactions of Nonferrous Metals Society of China, 20, (2010)‎ s788-s793.‎
  1. Maleki, A.‎, Panjepour, M.‎, Niroumand, B.‎, Meratian, M.‎, "Mechanism of Zinc Oxide–Aluminum Aluminothermic Reaction", Journal of Materials Science, 45, (2010)‎ 5574-5580.‎
  1. Firoozbakht, M.‎, Monir-Vaghefi, M.‎, Niroumand, B.‎, "Electroless Composite Coating of Ni–P–Carbon Nanotubes on Magnesium Powder", Journal of Alloys and Compounds, 509S,(2011)‎ S496-S502.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, "Development of Al356/SiCp Cast Composites by Injection of SiCp Containing Composite Powders", Journal of Materials & Design, 32, (2011)‎ 1895-1902.‎
  1. Amirkhanlou, S.‎, Jamaati, R.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Fabrication and Characterization of Al/SiCp Composites by CAR Process", Journal of Materials Science and Engineering, A528, (2011)‎ 4462-4467.‎
  1. Amirkhanlou, S.‎, Jamaati, R.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Manufacturing of High-Performance Al356/SiCp Composite by CAR Process", Journal of Materials and Manufacturing Processes, 26, (2011)‎ 902-907.‎
  1. Amirkhanlou, S.‎, Jamaati, R.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Using ARB Process as a Solution for Dilemma of Si and SiCp Distribution in Cast Al-Si/SiCp Composites", Journal of Materials Processing Technology, 211, (2011)‎ 1159-1165.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, "Effect of Particle Size on Microstructure and Mechanical Properties of Composites Produced by ARB Process", Journal of Materials Science and Engineering A, (2011)‎ 2143-2148.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, "Significant Improvement of Semi-Solid Microstructure and Mechanical Properties of A356 Alloy by ARB Process", Journal of Materials Science and Engineering,  A528, (2011)‎ 2495-2501.‎
  1. Amirkhanlou, S.‎, Rezaei, M.‎, Niroumand, B.‎, Toroghinejad, M.‎, "High-Strength and Highly-Uniform Composites Produced by Compocasting and Cold Rolling Processes", Journal of Materials & Design, 32, (2011)‎ 2085-2090.‎
  1. Amirkhanlou, S.‎, Rezaei, M.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Refinement of Microstructure and Improvement of Mechanical Properties of Al/Al۲O۳ Composite by Accumulative Roll Bonding Process", Journal of Materials Science and Engineering, A528, (2011)‎ 2548-2553.‎
  1. Khosro Aghaiani, M.‎, Niroumand, B.‎, "Effects of Ultrasonic Treatment on Microstructure and Tensile Sstrength of AZ91 Magnesium Alloy", Journal of Alloys and Compounds, 509, (2011)‎ 114-122.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, "Effects of Reinforcement Distribution on Low and High Temperature Tensile Properties of Al356/SiCp Cast Composites Produced by a Novel Reinforcement Dispersion Technique", Journal of Materials Science and Engineering A, A528, (2011)‎ 7186-7195.‎
  1. Khodaverdizadeh, H.‎, Niroumand, B.‎, "Effects of Applied Pressure on Microstructure and Mechanical Properties of Squeeze Cast Ductile Iron", Journal of Materials & Design, 32, (2011)‎ 4747-4755.‎
  1. Ghahremanian, M.‎, Niroumand, B.‎, Panjepour, M.‎, “Production of Al-Si-SiCp Cast Composites by Injection of Low Energy Ball-Milled Al-SiCp Powder into the Melt”, Journal of Metals and Materials International, 18, (2012)‎ 149-156.‎
  1. Reisi, M.‎, Niroumand, B.‎, “On the Dilemma of Shear and Flow Requirements for the Evolution of Semisolid Microstructures”, Materials Letters, 68, (2012)‎ 317-319.‎
  1. Reisi, M.‎, Niroumand, B.‎, “Modeling of shear induced dendrite coarsening during semisolid processing” Journal of Materials and Technology, 28 (2012)‎ 1241-1245.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, “Comparison of the microstructure and mechanical properties of as-cast A356/SiC MMC processed by ARB and CAR methods”, Journal of Materials Engineering and Performance, 21 (2012)‎ 1249-1253.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, “CAR process: a technique for significant enhancement of as-cast MMC properties” Journal of Materials Characterization, 62, (2011)‎ 1228-1234.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, “Fabrication and characterization of Al356/SiCp semisolid composites by injecting SiCp containing composite powders”, Journal of Materials Processing Technology, 212 (2012)‎ 841-847.‎
  1. Abasipour, B.‎, Monir-Vaghefi, M.‎, Niroumand, B.‎, “Electroless Ni-P-CNT Composite Coating on Aluminum Powder”, Journal of Metals and Materials International, 18 (2012)‎ 1015-1021.‎
  1. Reisi, M.‎, Niroumand, B.‎, “Initial stages of solidification during semisolid processing of a transparent model material”, Journal of Materials Chemistry and Physics, 135 (2012)‎ 738-748.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, “Microstructure and Mechanical Properties of Al356/SiCp Cast Composites Fabricated by a Novel Technique”, Journal of Materials Engineering and Performance, 22 (2013)‎ 85-93.‎
  1. Kaskani, M.‎, Niroumand, B.‎, “On Non-Dendritic Microstructure Formation During Sand Casting of A356 Alloy”, Solid State Phenomena A, 192-193 (2013)‎ 433-440.‎
  1. Jamshidi-Alashti R.‎, Mohammadi Zahrani M.‎, Niroumand B.‎, “Use of artificial neural networks to predict the properties of replicated open-cell aluminum alloy foam via processing parameters of melt squeezing procedure”, Materials & Design, 51 (2013)‎ 1035-1044.‎
  1. Shayan M.‎, Niroumand B.‎, “Synthesis of A356-MWCNT nanocomposites through a novel two stage casting process”, Materials Science & Engineering A, 582 (2013)‎ 262-269.‎
  1. Ashiri R.‎, Niroumand B.‎, Karimzadeh F.‎, “Physical, mechanical and dry sliding wear properties of an Al–Si–Mg–Ni–Cu alloy under different processing conditions” Journal of Alloys and Compounds, 582,(2014)‎ 213-222.‎
  1. Ashiri R.‎, Karimzadeh F.‎, Niroumand B.‎, “On effect of squeezing pressure on microstructural characteristics, heat treatment response and electrical conductivity of an Al-Si-Mg-Ni-Cu alloy” Journal of Materials Science and Technology, Accepted (2014)‎.‎
  1. Jamshidi-Alashti R.‎, Kaskani M.‎, Niroumand B.‎, “Semisolid melt squeezing procedure for production of open-cell Al-Si foams” Materials & Design, Accepted.‎

 

دروس تدريس شده دانشگاهي

ريختگري ۱، ريختگري ۲ ، انجماد فلزات و آزمايشگاههاي مربوطه

مقطع كارشناسي

روشهاي پيشرفته در ريختگري، اصول طراحي مهندسي در ريختگري، فرآيندهاي انجماد پيشرفته، مطالب ويژه در ريخته گري و انجماد، کامپوزیتهای ریختگی

مقاطع تحصيلات تكميلي

 

 

مشخصات فردي

اصفهان، دانشگاه صنعتي اصفهان، دانشكده مهندسي مواد، كد پستي ۸۳۱۱۱- ۸۴۱۵۶

آدرس

۳۹۱۵۷۳۱-۰۳۱۱ ، ۳۹۱۲۷۵۰-۰۳۱۱

تلفن

۳۹۱۲۷۵۲ـ۰۳۱۱

فاكس

nirouman@uwm.edu  behzn@cc.iut.ac.ir ,   

پست الكتروني

 

مدارك تحصيلي

دانشكده مهندسي مكانيك و ساخت و توليد،  دانشگاه ملبورن، استراليا، ۱۹۹۸

دكتراي مهندسي مواد

(Ph.D.‎)

Study of Solidification Behaviour and Microstructure of Primary Particles in Rheocast Al-Cu Alloys

پايان نامه:

دانشكده مهندسي و علم مواد، دانشگاه ولنگونگ، استراليا، ۱۹۹۱

كارشناسي ارشد مهندسي مواد (M.Eng.‎‪(hon.‎)‬)

پايان نامه:Study of Flow Pattern and Mixing Time in a Gas Injected Vessel

دانشكده مهندسي مواد، دانشگاه صنعتي اصفهان، ۱۳۶۸

كارشناسي مهندسي مواد

(گرایش توليد آهن و فولاد)

پروژه: مطالعه سرباره های صنعتی

 

 

مشخصات فردي

اصفهان، دانشگاه صنعتي اصفهان، دانشكده مهندسي مواد، كد پستي ۸۳۱۱۱- ۸۴۱۵۶

آدرس

۳۹۱۵۷۳۱-۰۳۱۱ ، ۳۹۱۲۷۵۰-۰۳۱۱

تلفن

۳۹۱۲۷۵۲ـ۰۳۱۱

فاكس

nirouman@uwm.edu  behzn@cc.iut.ac.ir ,   

پست الكتروني

 

مدارك تحصيلي

دانشكده مهندسي مكانيك و ساخت و توليد،  دانشگاه ملبورن، استراليا، ۱۹۹۸

دكتراي مهندسي مواد

(Ph.D.‎)

Study of Solidification Behaviour and Microstructure of Primary Particles in Rheocast Al-Cu Alloys

پايان نامه:

دانشكده مهندسي و علم مواد، دانشگاه ولنگونگ، استراليا، ۱۹۹۱

كارشناسي ارشد مهندسي مواد (M.Eng.‎‪(hon.‎)‬)

پايان نامه:Study of Flow Pattern and Mixing Time in a Gas Injected Vessel

دانشكده مهندسي مواد، دانشگاه صنعتي اصفهان، ۱۳۶۸

كارشناسي مهندسي مواد

(گرایش توليد آهن و فولاد)

پروژه: مطالعه سرباره های صنعتی

 

 

 

مقاله در مجلات بین المللی

  1. Niroumand, B.‎ & Xia, K.‎ "3D Study of the Structure of Primary Crystals in a Rheocast Al-Cu Alloy”, Journal of Materials Science and Engineering, A283 (2000)‎ 70-75.‎
  1. Ahmadi, J., Monirvaghefi, M.‎, Salehi, M.‎, Niroumand, B.‎ “Effect of Pearlite Interlamellar Spacing on Predominant Abrasive Wear Mechanism of Fully Pearlitic steel”, Transactions of Materials and Heat Treatment, 25, (2004)‎ 1207-1213.‎
  1. Falak, P.‎, Niroumand, B.‎ "Rheocasting of an Al-Si alloy", Scripta Materialia,Vol.‎53/1, (2005)‎ 53-57.‎
  1. Maleki, A.‎, Niroumand, B.‎ Shafeai, A.‎ "Effects of Squeeze Casting Parameters on Density, Macrostructure and Hardness of LM13 Alloy", Journal of Materials Science and Engineering A, 428, (2006)‎ 135-140.‎
  1. Mirzadeh, H.‎, Niroumand, B.‎, " Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds" Solid State Phenomena, 116-117 (2006)‎ 497-500.‎
  1. Reisi, M.‎, Niroumand, B.‎, "Evolution of Primary Particles Morphology during Secondary Cooling in SSR® Process" Solid State Phenomena, 116-117 (2006)‎ 493-496.‎
  1.  Tahamtan S.‎, Golozar M.A.‎, Karimzadeh F.‎ , Niroumand B.‎, "Microstructure and Tensile Properties of Thixoformed A356 Alloy", Journal of Materials Characterization, (2008)‎ 223-228.‎
  1. Ghahremainian, M.‎, Niroumand, B.‎, "Compocasting of an Al-Si-SiCp Composite Using Powder Injection Method" Solid State Phenomena, 141-143 (2008)‎ 175-180.
  1. Reisi, M.‎, Niroumand, B.‎, "Effects of Stirring Parameters on Rheocast Structure of Al-7.‎1wt%Si Alloy" Journal of Alloys and Compounds, 470 (2009)‎ 413-419.‎
  1. Mirzadeh, H.‎, Niroumand, B.‎, " Effects of Rheocasting Parameters on the Microstructure of Rheo-Centrifuged Cast Al-7.‎1wt%Si Alloy" Journal of Alloys and Compounds, 474 (2009)‎ 257-263.‎
  1. Ashiri, R.‎, Niroumand, B.‎, Karimzadeh, F.‎, Hamani, M.‎, Pouranvari, M.‎, "Effect of Casting Process on Microstructure and Tribological Behavior of LM13 Alloy" Journal of Alloys and Compounds, 475 (2009)‎ 321-327.
  1. Reisi, M.‎, Niroumand, B.‎, "Growth of Primary Particles during Secondary Cooling of a Rheocast Alloy" Journal of Alloys and Compounds, 475 (2009)‎ 643-647.‎
  1. Maleki, A.‎, Shafyei, A.‎, Niroumand, B.‎ "Effects of Squeeze Casting Parameters on the Microstructure of LM13 Alloy" Journal of Materials Processing Technology, 209 (2009)‎ 3790-3797.
  1. Maleki, A.‎, Meratian, M.‎, Niroumand, B.‎, Gupta, M.‎, "Synthesis of In-situ Aluminum Matrix Composite Using a New Activated Powder Injection Method" Metallurgical and Materials Transactions A, 39, (2008)‎ 3034-3039.‎
  1. Mirzadeh, H.‎, Niroumand, B.‎, "Fluidity of Al-Si Semisolid Slurries during Rheocasting by a Novel Process" Journal of Materials Processing Technology, 209, (2009)‎ 4977-4982.‎
  1. Nasr Esfahani, M.‎, Niroumand, B.‎, "Design of Hot Tearing Test Apparatus for Cast Alloys" Casting Technologies, ۵۵, (۲۰۰۹) ۴۲-۴۵.
  1. Niroumand, B.‎, Mirzadeh, H.‎, Reisi, M.‎, "Evaluation of Cast-On-Strap Joints in Lead-Acid Batteries" Journal of Materials Characterization, 60 (2009)‎ 1555-1560.‎
  1. Nasr Esfahani, M.‎, Niroumand, B.‎, "Design of A New Hot Tearing Test Apparatus and Modification of its Operation" Journal of Metals and Materials International, 16 (2010)‎ 35-38.‎
  1.  Nasr Esfahani, M.‎, Niroumand, B.‎, "Study of Hot Tearing of A206 Aluminum Alloy using Instrumented Constrained T-shaped Casting Method" Journal of Materials characterization, 61 (2010)‎ 318-324.‎
  1. Abasipour, B.‎, Niroumand, B.‎, Monir-Vaghefi, M.‎, "Compocasting of A356-CNT Composite", Transactions of Nonferrous Metals Society of China, 20, (2010)‎ 1561-1566.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, "Synthesis and Characterization of 356-SiCp Composites by Stir Casting and Compocasting Methods", Transactions of Nonferrous Metals Society of China, 20, (2010)‎ s788-s793.‎
  1. Maleki, A.‎, Panjepour, M.‎, Niroumand, B.‎, Meratian, M.‎, "Mechanism of Zinc Oxide–Aluminum Aluminothermic Reaction", Journal of Materials Science, 45, (2010)‎ 5574-5580.‎
  1. Firoozbakht, M.‎, Monir-Vaghefi, M.‎, Niroumand, B.‎, "Electroless Composite Coating of Ni–P–Carbon Nanotubes on Magnesium Powder", Journal of Alloys and Compounds, 509S,(2011)‎ S496-S502.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, "Development of Al356/SiCp Cast Composites by Injection of SiCp Containing Composite Powders", Journal of Materials & Design, 32, (2011)‎ 1895-1902.‎
  1. Amirkhanlou, S.‎, Jamaati, R.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Fabrication and Characterization of Al/SiCp Composites by CAR Process", Journal of Materials Science and Engineering, A528, (2011)‎ 4462-4467.‎
  1. Amirkhanlou, S.‎, Jamaati, R.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Manufacturing of High-Performance Al356/SiCp Composite by CAR Process", Journal of Materials and Manufacturing Processes, 26, (2011)‎ 902-907.‎
  1. Amirkhanlou, S.‎, Jamaati, R.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Using ARB Process as a Solution for Dilemma of Si and SiCp Distribution in Cast Al-Si/SiCp Composites", Journal of Materials Processing Technology, 211, (2011)‎ 1159-1165.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, "Effect of Particle Size on Microstructure and Mechanical Properties of Composites Produced by ARB Process", Journal of Materials Science and Engineering A, (2011)‎ 2143-2148.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, "Significant Improvement of Semi-Solid Microstructure and Mechanical Properties of A356 Alloy by ARB Process", Journal of Materials Science and Engineering,  A528, (2011)‎ 2495-2501.‎
  1. Amirkhanlou, S.‎, Rezaei, M.‎, Niroumand, B.‎, Toroghinejad, M.‎, "High-Strength and Highly-Uniform Composites Produced by Compocasting and Cold Rolling Processes", Journal of Materials & Design, 32, (2011)‎ 2085-2090.‎
  1. Amirkhanlou, S.‎, Rezaei, M.‎, Niroumand, B.‎, Toroghinejad, M.‎, "Refinement of Microstructure and Improvement of Mechanical Properties of Al/Al۲O۳ Composite by Accumulative Roll Bonding Process", Journal of Materials Science and Engineering, A528, (2011)‎ 2548-2553.‎
  1. Khosro Aghaiani, M.‎, Niroumand, B.‎, "Effects of Ultrasonic Treatment on Microstructure and Tensile Sstrength of AZ91 Magnesium Alloy", Journal of Alloys and Compounds, 509, (2011)‎ 114-122.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, "Effects of Reinforcement Distribution on Low and High Temperature Tensile Properties of Al356/SiCp Cast Composites Produced by a Novel Reinforcement Dispersion Technique", Journal of Materials Science and Engineering A, A528, (2011)‎ 7186-7195.‎
  1. Khodaverdizadeh, H.‎, Niroumand, B.‎, "Effects of Applied Pressure on Microstructure and Mechanical Properties of Squeeze Cast Ductile Iron", Journal of Materials & Design, 32, (2011)‎ 4747-4755.‎
  1. Ghahremanian, M.‎, Niroumand, B.‎, Panjepour, M.‎, “Production of Al-Si-SiCp Cast Composites by Injection of Low Energy Ball-Milled Al-SiCp Powder into the Melt”, Journal of Metals and Materials International, 18, (2012)‎ 149-156.‎
  1. Reisi, M.‎, Niroumand, B.‎, “On the Dilemma of Shear and Flow Requirements for the Evolution of Semisolid Microstructures”, Materials Letters, 68, (2012)‎ 317-319.‎
  1. Reisi, M.‎, Niroumand, B.‎, “Modeling of shear induced dendrite coarsening during semisolid processing” Journal of Materials and Technology, 28 (2012)‎ 1241-1245.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, “Comparison of the microstructure and mechanical properties of as-cast A356/SiC MMC processed by ARB and CAR methods”, Journal of Materials Engineering and Performance, 21 (2012)‎ 1249-1253.‎
  1. Jamaati, R.‎, Amirkhanlou, S.‎, Toroghinejad, M.‎, Niroumand, B.‎, “CAR process: a technique for significant enhancement of as-cast MMC properties” Journal of Materials Characterization, 62, (2011)‎ 1228-1234.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, “Fabrication and characterization of Al356/SiCp semisolid composites by injecting SiCp containing composite powders”, Journal of Materials Processing Technology, 212 (2012)‎ 841-847.‎
  1. Abasipour, B.‎, Monir-Vaghefi, M.‎, Niroumand, B.‎, “Electroless Ni-P-CNT Composite Coating on Aluminum Powder”, Journal of Metals and Materials International, 18 (2012)‎ 1015-1021.‎
  1. Reisi, M.‎, Niroumand, B.‎, “Initial stages of solidification during semisolid processing of a transparent model material”, Journal of Materials Chemistry and Physics, 135 (2012)‎ 738-748.‎
  1. Amirkhanlou, S.‎, Niroumand, B.‎, “Microstructure and Mechanical Properties of Al356/SiCp Cast Composites Fabricated by a Novel Technique”, Journal of Materials Engineering and Performance, 22 (2013)‎ 85-93.‎
  1. Kaskani, M.‎, Niroumand, B.‎, “On Non-Dendritic Microstructure Formation During Sand Casting of A356 Alloy”, Solid State Phenomena A, 192-193 (2013)‎ 433-440.‎
  1. Jamshidi-Alashti R.‎, Mohammadi Zahrani M.‎, Niroumand B.‎, “Use of artificial neural networks to predict the properties of replicated open-cell aluminum alloy foam via processing parameters of melt squeezing procedure”, Materials & Design, 51 (2013)‎ 1035-1044.‎
  1. Shayan M.‎, Niroumand B.‎, “Synthesis of A356-MWCNT nanocomposites through a novel two stage casting process”, Materials Science & Engineering A, 582 (2013)‎ 262-269.‎
  1. Ashiri R.‎, Niroumand B.‎, Karimzadeh F.‎, “Physical, mechanical and dry sliding wear properties of an Al–Si–Mg–Ni–Cu alloy under different processing conditions” Journal of Alloys and Compounds, 582,(2014)‎ 213-222.‎
  1. Ashiri R.‎, Karimzadeh F.‎, Niroumand B.‎, “On effect of squeezing pressure on microstructural characteristics, heat treatment response and electrical conductivity of an Al-Si-Mg-Ni-Cu alloy” Journal of Materials Science and Technology, Accepted (2014)‎.‎
  1. Jamshidi-Alashti R.‎, Kaskani M.‎, Niroumand B.‎, “Semisolid melt squeezing procedure for production of open-cell Al-Si foams” Materials & Design, Accepted.‎

 

.

 

دروس تدريس شده دانشگاهي

ريختگري ۱، ريختگري ۲ ، انجماد فلزات و آزمايشگاههاي مربوطه

مقطع كارشناسي

روشهاي پيشرفته در ريختگري، اصول طراحي مهندسي در ريختگري، فرآيندهاي انجماد پيشرفته، مطالب ويژه در ريخته گري و انجماد، کامپوزیتهای ریختگی

مقاطع تحصيلات تكميلي

 

 

.